Follow

Inventory Center - Project Settings - Manage Parking Stalls, Lockers, and Bicycle Storage

Inventory Center - Project Settings - Manage Parking Stalls, Lockers, and Bicycle Storage

In this article:

About Project Parking Stalls, Lockers, and Bicycle Storage

Storage in Lasso refers to the Parking Stall, Locker, and Bicycle Storage information that can be associated to each unit. Inventory Managers can add Storage Boards with available numbers/IDs so that they can be assigned to the units as needed. Storage is component-specific so if your project consists of separate components, Storage Boards must be added to each.

To view existing Storage Boards, hover over Project Settings, and select Storage. To view a specific Storage Board, click on the appropriate option in the fly-out menu. 

The overview displays Total Included, Total Purchased, Total Revenue, and Total Occupied for Parking Stalls, Lockers, and Bicycle Storage.

Add Parking Stalls

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Parking Stalls

You can add a single Parking Stall number or a range of numbers at one time.

To add a single Parking Stall number:

1 – Click on Add Single Parking Stall.

2 – Enter the Parking Stall number in the space beside Unique ID.

3 – Click Save.

To add a range of Parking Stall numbers:

1 – Click on Add Parking Stall Range.

2 – Enter the first number of the range in Start of Range.

3 – Enter the last number of the range in End of Range.

4 – Enter a Range Prefix if appropriate. This will appear at the beginning of each number in the range.

5 – Enter a Range Suffix if appropriate. This will appear at the end of each number in the range.

6 – Click Save.

The newly added Parking Stall number(s) will show on the Parking Stall Board.

Add Lockers

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Lockers

You can add a single Locker number or a range of numbers at one time.

To add a single Locker number:

1 – Click on Add Single Locker.

2 – Enter the Locker number in the space beside Unique ID.

3 – Click Save.

To add a range of Locker numbers:

1 – Click on Add Locker Range.

2 – Enter the first number of the range in Start of Range.

3 – Enter the last number of the range in End of Range.

4 – Enter a Range Prefix if appropriate. This will appear at the beginning of each number in the range.

5 – Enter a Range Suffix if appropriate. This will appear at the end of each number in the range.

6 – Click Save.

The newly added Locker number(s) will show on the Locker Board.

Add Bicycle Storage

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Bicycle Storage.

You can add a single Bicycle Storage number or a range of numbers at one time.

To add a single Bicycle Storage number:

1 – Click on Add Single Bicycle Storage.

2 – Enter the Bicycle Storage number in the space beside Unique ID.

3 – Click Save.

To add a range of Bicycle Storage numbers:

1 – Click on Add Bicycle Storage Range.

2 – Enter the first number of the range in Start of Range.

3 – Enter the last number of the range in End of Range.

4 – Enter a Range Prefix if appropriate. This will appear at the beginning of each number in the range.

5 – Enter a Range Suffix if appropriate. This will appear at the end of each number in the range.

6 – Click Save.

The newly added Bicycle Storage number(s) will show on the Bicycle Storage Board.

Delete Parking Stalls

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Parking Stalls

To delete a single Parking Stall number:

– Click on the Parking Stall number that you want to delete..

2 – Click on Delete.

3 – A message will come up asking if you’re sure you want to delete the Parking Stall number. Click OK.

To delete a range of Parking Stall numbers:

– Click on Delete Parking Stall Range.

2 – Enter the details for the Parking Stall range of numbers that you want to delete.
– Click on Delete.

– A message will come up asking if you’re sure you want to delete the Parking Stall range. Click OK.

Numbers in the selected range will be removed from the list as long as they are not assigned to units.

Warning: Deleting Parking Stalls will remove all references to the number(s) from inventory details and associated reporting.

Delete Lockers

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Lockers

To delete a single Locker number:

1 – Click on the Locker number that you want to delete.

2 – Click on Delete.

3 – A message will come up asking if you’re sure you want to delete the Locker number. Click OK.

To delete a range of Locker numbers:

1 – Click on Delete Locker Range.

– Enter the details for the Locker range of numbers that you want to delete.
– Click on Delete.

– A message will come up asking if you’re sure you want to delete the Locker range. Click OK.

Numbers in the selected range will be removed from the list as long as they are not assigned to units.

Warning: Deleting Lockers will remove all references to the number(s) from inventory details and associated reporting.

Delete Bicycle Storage

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Bicycle Storage

You can delete a single Bicycle Storage number or a range of numbers at one time.

To delete a single Bicycle Storage number:

1 – Click on the Bicycle Storage number that you want to delete.

2 – Click on Delete.

– A message will come up asking if you’re sure you want to delete the Bicycle Storage number. Click OK.

To delete a range of Bicycle Storage numbers:

1 – Click on Delete Bicycle Storage Range.

– Enter the details for the Bicycle Storage range of numbers that you want to delete.
– Click on Delete.

– A message will come up asking if you’re sure you want to delete the Bicycle Storage range. Click OK.

Numbers in the selected range will be removed from the list as long as they are not assigned to units.

Warning: Deleting Bicycle Storage will remove all references to the number(s) from inventory details and associated reporting.

View Parking Stall Board

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Parking Stalls

This brings you to the Parking Stall Board. Numbers indicated in red are assigned to Units of Inventory.

View Locker Board

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Lockers

This brings you to the Locker Board. Numbers indicated in red are assigned to Units of Inventory.

View Bicycle Storage Board

1 – In the Inventory Center, click on the appropriate Component tab, if applicable. You won't see Component tabs if there is only one.

components.jpg

2 – Hover over Project Settings to Storage and select Bicycle Storage

This brings you to the Bicycle Storage Board. Numbers indicated in red are assigned to Units of Inventory.